Abstract: Pre Stressing is a process of introducing residual compressive stresses zone around fastener holes which minimizes adverse effects of cyclic tensile stresses and retards the growth of fatigue cracks originating from the material flaws or surface imperfections. The present investigation is aimed at optimizing the inter hole distance between two adjacent cold expanded holes on a plate, limiting deformation of the material between holes to the elastic range by applying stress below the compressive yield strength of the material. It is found that ratio of central distance between holes to diameter of the holes (C/D) has a significant effect on the stress contours induced for a given percentage of expansion. The plate is modelled as a thick cylinder and equations are derived for radial stress. Graphs for these equations are plotted in MATLAB. ANSYS is used to conduct finite element analysis (FEA) of the cold expanded Mild Steel plate with two holes. To find the optimum centre distance betwe

• Publication Date: 09-Mar-2014
• DOI: 10.15224/978-1-63248-002-6-90
• Views: 0
• Downloads: 0

Abstract: This paper reports on the application of correlation dimension D2,largest Lyapunov exponent ʎ1 and maximum approximate entropy ApEtl max to diagnose the severity of rotor-to-stator rub in rotating machinery. The method of time delay was employed to reconstruct the vibration signal obtained from numerical simulation of a Jeffcott rotor subjected to rotor-to-stator rub. Numerical results showed clear correlation between the increase of rub severity with the invariant quantities,D2,ʎ1 and ApEtl max,investigated in this work.

• Publication Date: 09-Mar-2014
• DOI: 10.15224/978-1-63248-002-6-117
• Views: 0
• Downloads: 0