Loading...

Proceedings of

International Conference on Advances in Aeronautical and Mechanical Engineering AME 2012

Date
11-Aug-2012
Location
Kuala Lumpur , Malaysia
Authors
11
ISBN
978-981-07-2683-6

5 Articles Published

1. EFFECT OF UNSILANIZED AND SILANIZED FLY ASH ON DAMPING PROPERTIES OF FLY ASH FILLED FIBER REINFORCED EPOXY COMPOSITE

Authors: PRITISH SHUBHAM , S.K.TIWARI

Abstract: The damping characteristic of fly ash filled fiber reinforced epoxy resin was examined by varying the fly ash concentration from 0 to 30% by weight. Dynamic Mechanical Analyzer (DMA) was used to determine the temperature dependency of damping factor (tan δ). The testing was done under 3-point bending mode with frequency input of 10Hz at ramp rate of 5°C/min. The unsilanized and silanized fly ash concentration effect was compared and fly ash concentration limit for better damping property was ascertained. It was found that the glass transition temperature (Tg) and tan δ values improved with addition of fly ash up to certain point beyond which any further addition decreased Tg and tan δ. However the storage modulus and loss modulus increase with an increase in fly ash concentration. It was also found that silanized fly ash had lower tan δ value as compared to unsilanized fly ash.

Keywords: fly ash, coupling agent, DMA.

Pages: 20 - 24 | DOI: 105

2. BEHAVIOUR OF WELDING CURRENT IN SUBMERGED ARC WELDING

Authors: DINESH KUMAR SHUKLA , SUNIL PANDEY

Abstract: Influence of the process parameters on the weld deposit area and microstructure have been studied using bead on plate submerged arc welding process. It was found that the weld deposit area was affected by weld parameters like welding wire feed rate, welding speed, open circuit voltage, and contact-tube-to-work distance. The effect of welding current on weld deposit area has been studied independently by making a separate model for welding current. This is due to the fact that it is not possible to control the current in welding in semi-automatic processes unless it is a constant current welding process. Since the open circuit voltage was also one of the parameters, therefore, controlled variation of both the parameters wasn’t possible. The current automatically adjusts to a value at which the burn off rate and the wire feed rate are in equilibrium. To establish a relationship between weld deposit area and the welding parameters, two-level half-fractional factorial design was used. The

Keywords: Weld bead geometry and shape relationships, welding parameters, dilution, Submerged Arc Welding.

Pages: 1 - 4 | DOI: 10.15224/978-981-07-2683-6-101

3. BIOMIMETIC FLAPPING WING AERIAL VEHICLE

Authors: ISHA ATREJA , NISHANT JAIN , SATISH SHENOY B

Abstract: The aim of the project is to develop a flapping wing aerial vehicle (FWAV) designed using a biomimetic approach; replicating the flying patterns of birds. The development of FWAV is complicated and it involves light weight design, power transmission design, flight controls, low Reynolds number flight, energy supply, etc. An angle of attack is generated during each wing stroke by a spatial mechanism that is driven by a rotary actuator. A 129g, 927mm span two wing prototype has been developed. It is capable of producing required lift and thrust. The FWAV prototype produces a symmetric and steady flapping motion.

Keywords: Aerial vehiclish, flapping wing aerial vehicle (FWAV), non-autonomous, spatial mechanism, unmanned aerial vehicles.

Pages: 5 - 9 | DOI: 10.15224/978-981-07-2683-6-102

4. FLEXIBLE MANUFACTURING SYSTEM SCHEDULING: TABU SEARCH AND ANT COLONY OPTIMIZATION APPROACH

Authors: PRADEEP KUMAR KRISHNAN , SUNDAR RAJ SENTHIL KUMAR

Abstract: Manufacturing is embodied with several key functions and the scheduling activity has become an essential contributor to a successful manufacturing system. Scheduling allocates the time when a particular task or activity is to be processed by a given resource in order to optimize the requirements

Keywords: Flexible manufacturing systems, tabu search, ant colony optimization, scheduling

Pages: 10 - 13 | DOI: 10.15224/978-981-07-2683-6-103

5. STABILITY OF SIMPLY SUPPORTED SMART PIEZOLAMINATED COMPOSITE PLATES USING FINITE ELEMENT METHOD

Authors: KAMAL M. BAJORIA , RAJAN L. WANKHADE

Abstract: Piezolaminated smart structures are mostly used as light weight structures to control structural response in various structural applications. Piezoelectric materials possesses a property of direct and converse piezoelectric effects which can be adequately employed to control the deflection, vibration, shape and buckling of the structure. Due to the application of piezoelectric materials to control structural response, stability and control of light weight structures tends to be the governing criterion which requires significant attention. A finite element methodology is developed for stability analysis of smart piezolaminated composite plates subjected to combined action of electrical and mechanical loading. The finite element formulation is based on higher order shear deformation theory. Numerical analysis is made for stability analysis of simply supported piezolaminated plate

Keywords: Piezoelectric, Finite element method, vibration and stability.

Pages: 14 - 19 | DOI: 10.15224/978-981-07-2683-6-104

Popular Proceedings

ICETM 2023

9th International E-Conference on Engineering, Technology and Management

ESSHBS 2017

7th International Conference On Advances In Economics, Social Science and Human Behaviour Study

ASET 2017

7th International Conference on Advances in Applied Science and Environmental Technology

ACSM 2017

7th International Conference on Advances in Civil, Structural and Mechanical Engineering

CSM 2017

5th International Conference on Advances in Civil, Structural and Mechanical Engineering

SEM 2017

5th International Conference on Advances in Social, Economics and Management

ICETM 2022

8th International E- conference on Engineering, Technology and Management

ACSEE 2019

8th International Conference on Advances in Civil, Structural and Environmental Engineering